Extend the Life of a Paint Job With Power Washing

Extend the Life of a Paint Job With Power Washing

Electricity washing (also called pressure washing) is defined as by using a machine, wand and water to spray areas with high pressured INGESTING WATER and sometimes chemicals to clean areas. This is an imperative first step when preparing to coloring or stain any part of a home. If the proper cleaning is not completed prior to art work, the new paint will not likely stick to the surface and the new color usually will peel off in big chunks and small flakes. power washing fuquay

Power Cleansing Overview

Power washing washes and prepares surfaces that will be painted by removing dirt, mold, mildew and mold, pollutants, pollen and particles. 

Power washing also gets rid of most chalking that may have taken place. Chalking is the naturally happening breakdown of the chemicals surface of the pores and skin from sunlight ultraviolet sun rays.

Using the right pressure washer will ensure the perfect preparation for outdoor painting projects. The right amount of pressure will clean any surface, including wood, without creating harm. Also, using the proper nozzle helps keep the appropriate angle and fan flight of water for every single different surface. Experienced painting and power washing contractors will be able to prevent wand marks (or decoration of the surface), that can be caused by too much pressure applied at the wrong angle.

Power Cleansing the Exterior

Often, a homes exterior will have dirt, mold, mildew, impurities, pollen and dust; these all must be removed preceding to applying 2 layers of quality paint.

Cobwebs will be naturally present in the corners of many homes; most cobwebs and wasp nests will be washed away through the power wash, but some may stick and it is the job of your good painter to remove them by hand before later applying paint.

Color chips will literally travel off the home while being power washed; nevertheless , a power wash will not likely remove all chips or peeling. Using too much pressure or applying pressure too near the surface may bring about unnecessary destruction. The removed paint potato chips on a lawn can be removed by hand once dried, by the painter. Likewise, a good painter will walk around your property to clean up any paint chips which may have landed around the homes yard, roof, landscaping design and mulch beds during the power wash.

Spills are a tough thing to try and electric power wash away. Simply put, power washing will not remove all stains around the home. Some staining are actually discolorations from numerous years of weathering and will still be around even after a good ability wash. After the proper preparation and two layers of fresh paint, the house will look great and fresh with any lingering stains covered and forgotten.

Power Washing Units and Fences

Decks and fences are often perfect prospects for power cleansing; and both stand to enjoy the cleaning. Decks can be power washed with bleach or deck brightener to penetrate the wooden fibers. This will clean away old stain and brighten up grey solid wood fibers caused walking distance traffic, sun and waiting rain water. Fences often have mildew on the surface that is triggered by being a very soft wood, and being so near the ground and vegetation. Power washing will help remove these kind of mildews and rejuvenate the feel of any wood.

Chemical compounds

Several of the most frequent and best chemicals to use while washing the outside of a home is normal water, bleach and tri-sodium phosphate. Other specialty chemicals can be found, but for the average project prep, this will get the job done right. A large number of of the chemicals are organic and natural which prevents problems for plants, lawns, flowers, and landscaping. The bleach is so heavily diluted with water; that the electricity wash should be like a spring rain thunderstorm to the shrubs and landscaping.

Dry Time

The time it takes for a home to dry out after having an electricity wash varies greatly on the humidity, rain and temperature. Usually, most homes can be painted within 1 day after power cleansing; although, the person who quotes the painting task, should walk the home owner through a time desk for the project.


Leave a Reply

Your email address will not be published. Required fields are marked *