10 Steps to Floor Sanding

10 Steps to Floor Sanding

Ground sanding is not really a DIY job. That is in fact a job for the pros. Anyway just in circumstance you want to know how to sand a wooden floor I will give you a little tips for sanding and restoring wooden flooring.

First of all of all you will need to utilize a belt floor sanding machine with a very rough 36 grit on to remove all the old seal off also to level the floor. Always sand the earth going with the wooden grain or at a 45 degrees angle to the grain. https://corkcityfloorsanding.com

Next you will need to get started on the smoothing process by by using a 50 grit sanding seatbelt. This will remove the scratches left by the previous 36 grit seatbelt. 

Next use an eighty grit sanding belt to remove the scratches still left by the 50 resolution sanding belt.

Next you will desire a rotary sander or a buffer with a 100 grit or 120 grit disk to remove the fine scuff marks left by the eighty grit sanding belt. The buffer will leave the floor very smooth and prepare the floor for priming.

You will then need to utilize a solid wood flooring base prime to prepare the wood floor for lacquering.

Once you have set up the wooden floor you will then need to run the buffer machine over it with a 150 grit disk to remove any raised materials, leaving the floor very smooth.

Hoover the floor to remove all remnants of dust and commence to roller on the lacquer of your choice e. g Bona or Junkers.

Next apply the second coat of enamel after the first layer is dry.

After that you can apply a third coat of lacquer if it is a high traffic area to protect the floor more.

You should then try your better to keep the floor free of any grit and dirt to keep the floor taking a look at it is best for a much longer period of your energy.

Floor texturing and restoring wooden floor can transform an entire room from looking uninteresting and dirty to looking new, fresh and intensely trendy. Wooden flooring is a really expensive material for floor when you include the product and the assembly cost, so it is therefore very good for sand the floor and restore it as the cost is kept very low. Floor sanding again is a professional job if you can help it do not try and start a floor by yourself as it may wrap up ruining your special wooden floor.


Leave a Reply

Your email address will not be published. Required fields are marked *